• Can I input an installer contact number? +

    Yes, this can be inputted during the auto-setup sequence or, if required at a later date, can be inputted or altered via the settings menu.

  • What advanced settings are available to the installer? +

    Advanced settings should only be adjusted by a competent person, the wrong configuration can have a detrimental effect on the thermostat and the heating system.

    • Optimised start - Boiler starts heating in advance of schedule so heating reaches the required temperature at the time specified    Default: OFF
    • Optimised stop - Boiler stops heating in advance of schedule so heatingreaches the required temperature at the time specified   Default: OFF
    • Delayed Start - If the room temperature is close to target temperature the heating start time is delayed to save energy   Default: OFF
    • Display Tolerance -  Select the display tolerance of the room temperature. Can beset at increments of 0.5 or 0.10C  Default: 0.10C
    • Temperature offset - Fine tune the room temperature display -2.5 to 2.50C  Default: 0
    • Daylight saving time - Automatically move to daylight saving  Default: ON
    • Frost protection - The temperature that will used when to protect your home when the thermostat is off. Can be set 5 to 17°C  Default: 50C
    • Service phone number - Opportunity to input Installer contact number for service reminders  Default: Ideal Boilers number
  • What is Optimised Start? +

    The boiler starts heating in advance of schedule so heating reaches the required temperature at the time specified

  • What is Optimised Stop? +

    The boiler stops heating in advance of schedule so heating reaches the required temperature at the time specified

  • What is Delayed Start? +

    If the room temperature is close to target temperature the heating start time is delayed to save energy.