The Touch Connect comes supplied with an ethernet cable to connect your gateway and internet router. For full details please see the Touch Connect Installation guide and the installation guide for your internet router if required.
Currently there is no Night Set Back feature on the Touch Connect however, with 6 heating schedules per day there is the flexibility to set additional “on” periods with a lower setpoint to compensate for this.
Your Ideal boiler and Touch Control both have frost protection technology. However, if you have any concerns over sections of your central heating system (this could be that you have pipes running through a garage for example) the best thing to do is to consult and installer ref fitting a pipe thermostat, this should ensure that pipe temperatures remain above freezing in most conditions.
This feature provides for greater comfort and economy of operation. The boiler will be switched on earlier than the programmed heating on time. This provides for the room temperature to be achieved at the programmed heating on time, rather than some time afterwards. The boiler will automatically only use the minimum energy required in order to achieve the desired room temperature.
Our Technical Support telephone number is 01482 498663.
Why not browse our FAQs to see if your question has already been answered? From controls to help guides, advice on using your Touch Connect or connecting your boiler to Alexa, and the