• Vogue

    Vogue Range

    This is a comprehensive one day course suitable for installation and servicing companies.

    FREE 1 Day Course

    Book now

    Read more

    The course uses a simple step by step approach with hands on training to ensure all aspects of commissioning, servicing and fault finding can be dealt with quickly and efficiently. If you are an installer/service engineer, you must be Gas Safe Registered to attend a course.

    The course involves discussion with tutors and demonstrations with practical advice. Lunch and refreshments are provided and a certificate is awarded upon completion.

    Training Locations

    Course Content

    • Product range overview
    • Product specification
    • Installation requirements
    • Flue and accessory options
    • Component overview
    • Component change and repair
    • User controls
    • Sequence of operation
    • Fault finding
    • Enhanced product styling
    • Enhanced remote capability for maximum flexibility
  • ACS (Accredited Certification Scheme) Renewal

    The Core Domestic Natural Gas Safety (CCN1) and appliance reassessment course is a necessary requirement of the ACS (Accredited Certification Scheme).

    1 Day (Optional)

    Book now

    Read more

    The re-assessment training allows you to renew your qualifications in order to maintain your Gas Safe Register membership. The CPA1 (The Combustion performance analysis module) is now an integral part of the CCN1 Core module.

    You must be due for renewal or have had your qualification expired within the last 12 months.

    Training Locations

    Course Content

    • CCN1: Core Domestic Natural Gas Safety (now including CPA1)
    • CENWAT: Central heating boilers/hot water heaters
    • CKR1: Cookers
    • HTR1: Gas fires
    • MET1: Gas Meters
    • DAH1: Warm air units
    • LPG: Liquefied petroleum gas
  • Vented & Unvented Domestic Hot Water (Pre-requisite of QCF Aligned Assessments)

    This course aims to help plumbers and heating engineers who want to install Vented and Unvented Domestic Hot Water Storage Systems to comply with the appropriate Building Regulations and Standards.

    £90 Inc. VAT 1 Day

    Book now

    Read more

    This very comprehensive course starts with intensive training in the four modules, followed by the completion of three assessments including one practical. Candidates must successfully pass all three assessments to gain the BPEC Domestic Hot Water Storage Systems certificate.


    This course consists of four modules: Vented and Unvented systems and their operating principles, Design and installation, Maintenance and Compliance with other Building Regulations.

    Course Content

  • Water Regulations (Pre-requisite of QCF Aligned Assessments)

    This course covers the Water Supply (Water Fittings) Regulations 1999 (England and Wales) and the Water Byelaws 2004 (Scotland) and meets the requirements of WRAS (the Water Regulations Advisory Scheme) of which the majority of the UK water companies are members.

    £90.00 Inc. VAT 1 Day

    Book now

    Read more

    This very comprehensive course starts with training split into 12 modules followed by the completion of three assessments. There are no practical elements – all training is theoretical. Candidates must successfully pass all three assessments to gain the WRAS/BPEC Water Regulations/Byelaws certificate.

    Course Content

  • Logic Range Training

    Logic / Logic + Range

    This is a comprehensive one day course suitable for installation and servicing companies.

    FREE 1 Day Course

    Book now

    Read more

    The course uses a simple step by step approach with hands on training to ensure all aspects of commissioning, servicing and fault finding can be dealt with quickly and efficiently. If you are an installer/service engineer, you must be Gas Safe Registered to attend a course.

    The course involves discussion with tutors and demonstrations with practical advice. Lunch and refreshments are provided and a certificate is awarded upon completion.

    Training Locations

    Course Content

    • Product range overview
    • Product specification
    • Installation requirements
    • Flue and accessory options
    • Component overview
    • Component change and repair
    • User controls
    • Sequence of operation
    • Fault finding
    • Enhanced product styling
    • Enhanced remote capability for maximum flexibility
  • ISAR/ICOS Range

    This is a comprehensive one day course suitable for installation and servicing companies.

    FREE 1 Day Course

    Book now

    Read more

    The course uses a simple step by step approach with hands on training to ensure all aspects of commissioning, servicing and fault finding can be dealt with quickly and efficiently. If you are an installer/service engineer, you must be Gas Safe Registered to attend a course.

    The course involves discussion with tutors and demonstrations with practical advice. Lunch and refreshments are provided and a certificate is awarded upon completion.

    Training Locations

    Course Content

    • Product range overview
    • Product specification
    • Installation requirements
    • Flue and accessory options
    • Component overview
    • Component change and repair
    • User controls
    • Sequence of operation
    • Fault finding
    • Enhanced product styling
    • Enhanced remote capability for maximum flexibility
  • Essential Electrics

    This is a comprehensive one day course suitable for installation and servicing companies.

    FREE 1 Day Course

    Book now

    Read more

    The course uses a simple step by step approach with hands on training to ensure all aspects of commissioning, servicing and fault finding can be dealt with quickly and efficiently. If you are an installer/service engineer, you must be Gas Safe Registered to attend a course.

    The course involves discussion with tutors and demonstrations with practical advice. Lunch and refreshments are provided and a certificate is awarded upon completion.

    Training Locations

    Course Content

    • Product range overview
    • Product specification
    • Installation requirements
    • Flue and accessory options
    • Component overview
    • Component change and repair
    • User controls
    • Sequence of operation
    • Fault finding
    • Enhanced product styling
    • Enhanced remote capability for maximum flexibility
  • Range Product Evomax

    EVOMAX

    This is a comprehensive one-day course designed for commercial service engineers.

    FREE 1 Day Course

    Book now

    Read more

    The course uses a simple step-by-step approach with hands on to ensure all aspects of commissioning, servicing, and fault finding can be dealt with quickly and efficiently. If you are an installer/service engineer you must be Gas Safe Registered.

    The course involves discussion with tutors and demonstrations with practical advice. Lunch and refreshments are provided and a certificate is awarded upon completion.

    Training Locations

    Course Content

    • Installation & commissioning
    • Servicing and fault-finding
    • PCB logic is explained
    • Flue flexibility
    • Option kits
  • IMAX W

    The course uses a simple step-by-step approach with hands on training to ensure all aspects of commissioning, servicing, and fault finding can be dealt with quickly and efficiently. If you are an installer/service engineer you must be Gas Safe Registered to attend a course.

    £80.00 Inc. VAT 1 Day Course

    Book now

    Read more

    The course involves discussion with tutors, demonstrations with practical advice. Lunch and refreshments are provided and a certificate is awarded upon completion.

    Training Locations

    Course Content

    • Installation & commissioning
    • Servicing and fault-finding
    • PCB logic is explained
    • Flue flexibility
    • Option kits
  • IMAX PLUS

    The course uses a simple step-by-step approach with hands on training to ensure all aspects of commissioning, servicing, and fault finding can be dealt with quickly and efficiently. If you are an installer/service engineer you must be Gas Safe Registered to attend a course.

    £80.00 Inc. VAT 1 Day Course

    Book now

    Read more

    The course involves discussion with tutors, demonstrations with practical advice. Lunch and refreshments are provided and a certificate is awarded upon completion.

    Training Locations

    Course Content

    • Installation & commissioning
    • Servicing and fault-finding
    • PCB logic is explained
    • Flue flexibility
    • Option kits
  • EVOMOD

    The course uses a simple step-by-step approach with hands on training to ensure all aspects of commissioning, servicing, and fault finding can be dealt with quickly and efficiently. If you are an installer/service engineer you must be Gas Safe Registered to attend a course.

    FREE 1 Day Course

    Book now

    Read more

    The course involves discussion with tutors, demonstrations with practical advice. Lunch and refreshments are provided and a certificate is awarded upon completion.

    Training Locations

    Course Content

    • Installation & commissioning
    • Servicing and fault-finding
    • PCB logic is explained
    • Flue flexibility
    • Option kits
  • IMAX XTRA

    The course uses a simple step-by-step approach with hands on training to ensure all aspects of commissioning, servicing, and fault finding can be dealt with quickly and efficiently. If you are an installer/service engineer you must be Gas Safe Registered to attend a course.

    FREE 1 Day Course

    Book now

    Read more

    The course involves discussion with tutors, demonstrations with practical advice. Lunch and refreshments are provided and a certificate is awarded upon completion.

    Training Locations

    Course Content

    • Installation & commissioning
    • Servicing and fault-finding
    • PCB logic is explained
    • Flue flexibility
    • Option kits