Most programmers will either have their make or model on the front or on a drop down panel.
What warranty does my programmer have ?
If installed at the same time as the boiler, our programmers currently mirror the warranty of the appliance they are fitted to. If it is not fitted at the same time as the boiler then the standard warranty period of the programmer will be 12 months.
Does my manufactures warranty cover all controls?
Any of our own control units such as the PRT3 or the Touch programmer will mirror the boilers warranty if they are purchased and installed at the same time. Unfortunately, any other manufacturers control units would not be covered by us.
How do I set my timer up?
User guides for our current programmers can be found under the literature section of our website in PDF format. They explain how to set times, temperatures and alternative functions.
What controls are compatible with my boiler?
Any controls that work on 240 Vac can be used alongside our current range of boilers. The Logic and Vogue range can also be controlled by OpenTherm technology. For more information regarding this you can contact our customer services team on 01482 498660.
How do I re-set my boiler controls after changing the batteries?
On the PRT3, the reset button is located on the transceiver unit at the front of the boiler and on the programmable room thermostat. These should be held in for 5 seconds with the unit left next to the boiler for 15 minutes to pair. On the Touch programmer, this should happen automatically but can also take up to 15 minutes. If you require further assistance please contact our Customer Service department on 01482 498660.